Fiberlogy easy PETG - fehér
Bruttó: 8 890 Ft
Fiberlogy easy PETG - fehér
Bruttó: 8 890 Ft
Egységár: Bruttó: 10 459 Ft/kg
EASY PET-G properties:
- ease of printing
- high durability
- low susceptibility to shrinkage and flossing
- resistance to acids, salts, alkaline substances
- odorless
How to print EASY PET-G?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
| Nozzle Temperature | 220-250°C |
| Bed Temperature | 90°C |
| Closed chamber | not required |
| Fan | 0-25% |
| Flowrate | 95-105% |
| Printing Speed | < 100 mm/s |
| Surface | masking tape |
| Retraction (direct) | 2-3 mm |
| Retraction (bowden) | 3-5 mm |
| Retraction Speed | 20-45 mm/s |
| Drying conditions | 60°C / 4h |
| Notes | Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape. |
