PETG - Carbon Fiber

PETG CF has been developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is certified according to REACH and RoHS standards. PETG is flame retardant according to UL 94 with a wall thickness of 3.2 mm.

Carbon composite material for performance applications
Excellent mechanical properties
High chemical resistance
Low warping
Low shrinking

Azure PET CF - 50dkg

PET-CF-AZURE

Significant advantages of AzureFilm PET CF filaments:

Cost effective - since we are using chopped up carbon fibers there is significant reduction in production length, allowing us to make our material cost friendly for any customer
Higher temperature resistance up to 125°C
More dimensional stability - Chopped carbon fibers are extremely strong and not only give high strenght and stiffness but also help prevent shrinking as the part is in the cooling down faze

Printing Recommendations:

Nozzle temperature: 245 – 270°C
Heated bed: recommended 80-90°C
Print speed: 40 –60 mm/s
Layer height: 0,2mm
Build platform: Blue tape, Kapton tape, glassbed + Dimafix spray

ÚJ

Átmérő

Súly

Szín

Bruttó: 16 510 Ft

Egységár: Bruttó: 33 020 Ft/kg

Kosárba

Részletek

FilamentPM PETG CF (RAL 7024)

PETG-CF-FilaPM

CFJet this material is based on PETG and contains 17 % of carbon fibers,

therefore, it is characterized by higher strength and rigidity than conventional PETG.

It is ideal for mechanical components and has a beautiful matte surface.

Parameters

Diameter	1.75 mm
Tolerance	0,05 mm
Weight	0.5 kg
Empty spool weight	0.204 kg
Packaging weight	0.84 kg
Packaging dimensions	width: 225 mm, height: 65 mm, depth: 210 mm
Nozzle	220 - 250 °C
Heatbed	80 - 90 °C
RAL	7024
Pantone	446 C

ÚJ

Átmérő

Súly

Szín

Bruttó: 16 510 Ft

Egységár: Bruttó: 33 020 Ft/kg

Kosárba

Részletek

TreeD PETG CF - 75dkg

PETG-CF-TREED

With PET CF 15 you can reproduce objects and devices with superior characteristics in every printer.

100% printable in every printer, 100% satisfaction guarantee.

Best use in office and textile machines, mechanical parts like supports and other. You can aneel them.

No moisture inside PET CF filaments, warrant of repeatibility.

PET CF is a pet carbon fiber reinforced developed for 3D printing and to obtain best results we recommend pre drying the filaments at 120° for 4-6 h. Increase drying time for spools up 1 kg. Don’t leave the filament stopped inside the nozzle more than 20 min.

0.5 mm is the mininum diameter of the nozzle with carbon fibers reinforced. Carbon fibers are abrasive, we suggest to use a nozzle in hardened or tempered metal

Átmérő

Súly

Bruttó: 19 050 Ft

Egységár: Bruttó: 25 400 Ft/kg

Kosárba

Részletek

Extrudr XPETG - MATT CF (black | RAL 9017)

PETG-EXTRUDR-MATT10

Átmérő

Súly

Bruttó: 19 050 Ft

Egységár: Bruttó: 23 813 Ft/kg

Kosárba

Részletek

TOP termékek

Termékajánló