After printing, insert the product into lukewarm water,
within 12-24 hours, the PVA material will dissolve,
leaving your base material and a wonderful product.
For good results, you must print at a temperature of 190-210 ° C
and the printing table should be heated to 50-60 ° C.
It is mainly designed for professional use. Most often it is used for the production of prototypes, which must withstand higher temperatures. Finished products are very durable and impact resistant.
Printing Recommendations:
Nozzle temperature: 230–260°C
Heated bed: Recommended 100–120°C + Enclosure
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
PCTG belongs to the same family of polyesters as the increasingly popular PET-G. Compared to its more popular counterpart, PCTG offers increased impact strength, temperature resistance and clarity, making it an excellent alternative to PET-G.
Printing Recommendations:
Nozzle temperature: 230–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, PEI Sheet.
ASA filament is made for open 3D Printers can not print with ABS .
ASA Filament is stiffer, stronger and flexible.
Products that are made of ASA are very durable and impact resistant.
Printing Recommendations:
Nozzle temperature: 240–260°C
Heated bed: Recommended 100–120°C + Enclosure
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
It is mainly designed for professional use. Most often it is used for the production of prototypes, which must withstand higher temperatures. Finished products are very durable and impact resistant.
Printing Recommendations:
Nozzle temperature: 230–260°C
Heated bed: Recommended 100–120°C + Enclosure
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.