PP-C18

Az első és egyetlen szén-szál erősítésű Polypropilene !

Speciális folyadék szivattyújában tesztelték, folyamatos működés mellett.
Legmegfelelőbb anyag agresszív folyadékokkal érintkező alkatrészknél.

Alkalmas ATEX alkalamazásokhoz!

Alig veszi fel a nedvességet (0,3%), így szárításra nincs szükség.

Átmérő

Súly / spool

Bruttó: 21 209 Ft

Egységár: Bruttó: 28 279 Ft/kg

Kosárba

Részletek

TreeD: PA12 - Carbonio piros - 75dkg

PA-CARBred

The original Carbonium filament made in 2016 now change to Carbonio Nylon, improved formulation, charged with carbon fibre:
- USP - System UVA Shield Protection
- To improve Ultra Violet Ray aggression

- We use only fibers, not powders, because it’s not
“Powder Carbon” but “Fiber Carbon”

Ideális anyag nagy mechanikai tűrést, ellenállást megkívánó alkalmazásokhoz, köszönhetően kimagasló tensile modulus értékének.

ÚJ

Átmérő

Súly

Szín

Bruttó: 29 972 Ft

Egységár: Bruttó: 39 963 Ft/kg

Kosárba

Részletek

Azure: PA6 carbon - 50dkg

PAHT

PAHT Carbon Fibre 1.75mm

PAPH Carbon Fibre is a High temperature polyamide based material.
This Filament is High performance material for industrial FDM printing.
It is temperature resistant up to 160°C and can be used for printing durable end user parts

Printing Recommendations:

Nozzle temperature: 270 – 290°C
Heated bed: recommended 90-120 °C
Print speed: 40 – 60 mm/s
Layer height: 0,2 mm
Build platform: Blue tape, Kapton tape, glass bed + Dimafix spray

Requirements to work with PAHT CF filaments:

Heated print bed
Hardened nozzle - Due to its abrasive structure, filament will wear down standard brass nozzle over a short period of time. Abrasion resistant nozzle is requirement for this type of filament. Since those type of nozzles tend to be less conductive then standard nozzles, usually higher extruder temperatures are recommended
Heated filament chamber (optional) - Having the filament all the time in dry place, with working temp. ready is an optional thing to ensure consistently controlled environment for best product quality
Closed environment (optional) - Ensuring consistent controlled environment is very important factor that allows better end class quality of the product although this filament has ability to be 3D printed on non-heated chamber machines

ÚJ

Átmérő

Súly

Szín

Bruttó: 23 495 Ft

Egységár: Bruttó: 46 990 Ft/kg

Kosárba

Részletek

Fiberlogy PA12 GF15

PA12_GF15-FIB

PA12 + GF15 is another material offered by Fiberlogy, which is a derivative of Nylon PA12.

It was created by reinforcing it with glass fiber (GF), which constitutes 15% of the product. This made it possible to significantly increase the durability, stiffness, and thermal and chemical resistance compared to pure Nylon. PA12 + GF15 has a stiffness of 3.6 GPa and a temperature resistance of up to 170°C.

The very low shrinkage ensures high dimensional stability. This combined with high durability makes engineering excellence achievable at home. This filament does not require a heated chamber. However, due to the high abrasiveness, steel or ruby nozzles should be used for printing in order to prevent excessive wear.

Nylon PA12+GF15 properties:

a perfect combination of high durability and impact resistance
dimensional stability
resistance to high temperatures (up to 170°C) and chemicals
resistance to material fatigue
the possibility to print with an open printer

How to print Nylon PA12+GF15:

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature	255-270°C
Bed Temperature	90-110°C
Closed chamber	not required
Fan	0-25%
Flowrate	90-100%
Printing Speed	35-60 mm/s
Surface	PEI, glass, masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	80°C / 4h
Notes	The material has highly abrasive properties. We recommend the use of hardened steel or ruby nozzles. Wear gloves (the possibility of micro damages on the skin). Use a dust mask and protective glasses when processing.

Átmérő

Súly

Szín

Bruttó: 21 590 Ft

Egységár: Bruttó: 43 180 Ft/kg

Kosárba

Részletek

FilamentPM - PA CFJet

PAJet-CF

PA-CFJet
- engineering thermoplastic PA12 with 17% carbon fibers
- thanks to the carbon fibers, the material becomes harder and tougher with remaining impact resistance
- use for prototyping, 3D-printer parts, construction parts, mechanically and thermally stressed parts
- it has similar printing properties as ABS
- highly heat (up to 160 ° C), impact, chemical and mechanical resistant
- thanks to the carbon fibers, the material has a rougher matte graphite surface

PRINTING SETUP
Nozzle: 230 - 240 °C
Heatbed: 110 - 120 °C
▪ speed: 40mm/s
▪ draft-free heated environment
▪ print without object fan
▪ kapton printing bed, thicker Ultem, metal sheet, or double-sided Powder-coated PA Nylon Sheet by Prusa
MAGIGOO HT (ideal for PA-CFJet materials)

ÚJ

Átmérő

Súly

Bruttó: 15 240 Ft

Egységár: Bruttó: 30 480 Ft/kg

Kosárba

Részletek

Fiberlogy PCTG-CF

PCTG-CF-FIB

PCTG+CF filament is a revolutionary combination of the versatility of PCTG and unique properties of carbon fiber (CF).

The well-known PCTG filament has been enriched with 10% of carbon. This way, the material is much more stiff. Additionally, greater tensile strength in comparison with pure PCTG makes this filament a good choice for designs requiring increased strength. For engineers and designers who need a material which combines efficiency and technical excellence, PCTG+CF filament is the answer to these requirements, which paves the way for new possibilities in 3D printing.

Another advantage of this 3D printing filament is its reduced shrinkage. This makes it perfect for precision designs, especially for models with a complex geometry. The possibility to use Fiberlogy PCTG+CF in open 3D printers additionally enhances its versatility, allowing to use in different machines.

PCTG+GF properties:

great stiffness and tensile strength
chemical and heat resistance
carbon finish which hides the layers perfectly
low shrinkage and ability to use in almost any 3D printer
easy mechanical post processing of the print

How to print PCTG+GF?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature	250-270°C
Bed Temperature	90-110°C
Closed chamber	not required
Fan	0-25%
Flowrate	90-100%
Printing Speed	35-60 mm/s
Surface	masking tape, PVA glue, hairspray
Retraction (direct)	1-2 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	The material has highly abrasive properties. We recommend the use of hardened steel or ruby nozzles. Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

Átmérő

Súly

Bruttó: 17 145 Ft

Egységár: Bruttó: 22 860 Ft/kg

Kosárba

Részletek

Fiberlogy: PA12 GF 15% - Natural

PA12_GF15-Fiberlogy

DURABILITY AND RESISTANCE

PA12 + GF15 is another material offered by Fiberlogy, which is a derivative of Nylon PA12. It was created by reinforcing it with glass fiber (GF), which constitutes 15% of the product.
This made it possible to significantly increase the durability, stiffness, and thermal and chemical resistance compared to pure Nylon.
PA12 + GF15 has a stiffness of 3.6 GPa and a temperature resistance of up to 170°C.

Unlike Nylon with an addition of carbon fiber, available as Fiberlogy PA12 + CF5 and PA12 + CF15, this filament offers greater flexibility, making it ideal for applications operating under variable loads and exposed to impacts.

The very low shrinkage ensures high dimensional stability. This combined with high durability makes engineering excellence achievable at home. This filament does not require a heated chamber. However, due to the high abrasiveness, steel or ruby nozzles should be used for printing in order to prevent excessive wear.

AUTOMOTIVE: elements in the engine compartment, housing of vehicle components, air intakes, fluid fillers
INDUSTRY: spare parts, short series, utility models
MEDICINE: prostheses, medical equipment
SPORT: accessories, pads, airsoft elements

Átmérő

Súly

Szín

Bruttó: 21 590 Ft

Egységár: Bruttó: 43 180 Ft/kg

Kosárba

Részletek

TreeD: Structure - Orthopedics filament

Health-L5

STRUCTURA ORTHOPEDICS 3D FILAMENT - Skin contact cert

Structura MA was created to combine lightweight properties with mechanical strenght.
The addition of carbon fibers allows the production of structural supports with more advanced geometries and by overcoming more constructive challenges than ever before.

Applicable for production of prosthetics ans exoskeletal elements

Átmérő

Súly

Szín

Bruttó: 50 800 Ft

Egységár: Bruttó: 50 800 Ft/kg

Kosárba

Részletek