PETG-FIB-W

EASY PET-G properties:

ease of printing
high durability
low susceptibility to shrinkage and flossing
resistance to acids, salts, alkaline substances
odorless

How to print EASY PET-G?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature	220-250°C
Bed Temperature	90°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape
Retraction (direct)	2-3 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.

Átmérő

Súly

Bruttó: 8 890 Ft

Egységár: Bruttó: 10 459 Ft/kg

Kosárba

Részletek

Fiberlogy easy PETG - fehér 2,5kg

PETG-FIB-WB

Átmérő

Súly

Bruttó: 23 495 Ft

Egységár: Bruttó: 9 398 Ft/kg

Kosárba

Részletek

Fiberlogy - CPE HT - transparens

CPE

Fiberlogy CPE HT filament is a modern copolyester that stands out for its high mechanical and temperature resistance. As member of the polymers family, which includes PETG and PCTG filament, it surpasses them in terms of resistance to high temperatures, even up to 110°C. Like other related materials, this filament has a high resistance to chemicals and lipids.

It is odourless and BPA, BPS and styrene free and can be used to create food contact parts *. CPE HT will find numerous applications that require resistance to degrading conditions, such as in a dishwasher or in the process of chemical sterilization or UV radiation.

Fiberlogy CPE HT is an attractive alternative to polycarbonate (PC) filaments. Having similar strength parameters as PC filament, it does not share with it the characteristics that make it difficult to use in 3D printing.
^{* applies to the filament in the Pure TR version}

CPE HT properties:

temperature resistance up to 110°C
no odour
BPA, BPS and styrenes-free
high mechanical strength
comparable to the PC

How to print CPE HT?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature	260-280°C
Bed Temperature	110-120°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape, PVA glue, hairspray
Retraction (direct)	1-2 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

Átmérő

Súly

Bruttó: 15 240 Ft

Egységár: Bruttó: 20 320 Ft/kg

Kosárba

Részletek

Fiberlogy - CPE ANTIBAC - natur

CPE-antibac

Fiberlogy CPE ANTIBAC is an innovative antibacterial filament with high mechanical and temperature resistance combined with antimicrobial properties. Considering the resistance to high temperatures, it surpasses e.g. PET-G or PCTG filament that belong to the same polymer family. It is resistant to temperatures up to 110°C and the effects of UV radiation, chemicals, and lipids.
CPE ANTIBAC is odorless, as well as BPA, BPS and styrene-free. This antibacterial filament ownes its properties to silver nanoparticles that guarantee effective protection against microbes. The microbiological tests performed show biocidal properties both of the filaments and 3D prints. Research results confirm the effectiveness in reducing the number of bacteria, among others Escherichia coli (by 100%) and Staphylococcus aureus (by 92.4%). In the repeated testing, a result of 100% and 97%, respectively, was obtained.
CPE ANTIBAC is intended for use on both desktop and industrial FFF/FDM 3D printers. A closed printing chamber is not required, but it can help achieve prints with better durability parameters. Due to its unique properties, Fiberlogy CPE ANTIBAC shall be applied in prints exposed to microbial growth, such as plastic elements found in public spaces, laboratory equipment, as well as clinical accessories.

CPE ANTIBAC properties:

eliminates 100% of Escherichia coli bacteria and over 90% of Staphylococcus aureus
temperature resistance up to 110°C
BPA, BPS and styrenes-free
high mechanical strength
suitable for sterilization

How to print CPE ANTIBAC?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature	260-280°C
Bed Temperature	110-120°C
Closed chamber	not required
Fan	0-25%
Flowrate	95-105%
Printing Speed	< 100 mm/s
Surface	masking tape, PVA glue, hairspray
Retraction (direct)	1-2 mm
Retraction (bowden)	4-6 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h

ÚJ

Átmérő

Súly

Bruttó: 19 050 Ft

Egységár: Bruttó: 38 100 Ft/kg

Kosárba

Részletek

Fiberlogy PCTG GF

PCTG-GF-FIB

PCTG+GF filament is our new product for 3D print enthusiasts. This material combines the strength and versatility of modern copolyester with the unique properties of glass fiber. It is a technical filament for 3D printing with a high impact strength. That makes it an ideal for advanced projects where typical polymers are not enough.

Fiberglass (10%) adds unique capabilities to the filament. This creates a product with greater strength and stiffness, while maintaining resistance to external conditions and chemicals. The properties of the PCTG GF filament make it ideal for printing machine parts, tools or outdoor applications.

PCTG+GF properties:

high impact and tensile strength
chemical and thermal resistance
a matte finish that makes it easy to hide layers
low shrinkage and the ability to print on open printers

How to print PCTG+GF?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

Nozzle Temperature	250-270°C
Bed Temperature	90-110°C
Closed chamber	not required
Fan	0-25%
Flowrate	90-100%
Printing Speed	35-60 mm/s
Surface	masking tape, PVA glue, hairspray
Retraction (direct)	1-2 mm
Retraction (bowden)	3-5 mm
Retraction Speed	20-45 mm/s
Drying conditions	60°C / 4h
Notes	The material has highly abrasive properties. We recommend the use of hardened steel or ruby nozzles. Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.