Magigoo HT glue stick - 50ml

Ideal for: PEI, PEEK, PPS, all HT product over 300 °C 

MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

High-temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures owing to their high-temperature properties. MAGIGOO HT is a specialized solution for FDM printing of PEEK filaments which was developed to work at elevated printing temperatures.

HOW TO USE IT:
MAGIGOO HT has been designed and tested to work with build-plate temperature of 150 °C or lower.
• Shake the bottle.
• Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
• Print according to the filament/printer manufacturers recommendations
• Allow to cool and remove. The print should pop right off
• Clean - Use a damp cloth to wipe off.

Using this product with other than PEEK filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for the best results.

Tips:
For larger prints, a 20 mm brim is recommended.
Magigoo HT was designed for glass surface but also works on high-temperature garolite and other build-surfaces.